? low profile package ? built-in strain relief ? glass passivated junction ? excellent clamping capability ? typical i r less than 1ua above 10v xxx = specific device code g = green compound y = year m = work month maximum ratin g s and electrical characteristics rating at 25 ambient temperature unless otherwise specified symbol unit p pk watts p d watts r ja /w r jl /w t j , t stg value thermal resistance junction to leads 15 50 thermal resistance junction to ambient air ? standard packaging: 16mm tape (eia std rs-481) note 1: non-repetitive current pulse, per fig. 3 and derated above t a =25 per fig. 2 note 2: mounted on 8mm x 8mm copper pads to each terminal power dissipation on intinite heatsink, t a =50 6.5 1.5smc series 1500 watts surface mount transient voltage suppressor marking diagram smc/do-214ac dimensions in inches and (millimeters) ? weight: 0.21 gram type number operating and storage temperature range peak power dissipation at t a =25 , tp=1ms(note 1) version:f11 -55 to +150 features ? polarity: indicated by cathode band mechanical data ? terminals: solder plated ? case: molded plastic devices for bipolar applications 1. for bidrectional use c or ca suffix for types 1.5smc6.8 through types 1.5smc200a 2. electrical characterstics apply in both directions ? for surface mounted application in order to optimize board space ? fast response time: typically less than 1.0ps from 0 volt to bv min ? high temperature soldering guaranteed: 260 / 10 seconds at terminals ? plastic material used carries underwriters laboratory flammability classification 94v-0 ? 1500 watts peak pulse power capability with a 10 / 1000 us waveform ? green compound with suffix "g" on packing code & prefix "g" on datecode 1500 peak forward surge current, 8.3ms single half sine-wave superimposed on rated load (jedec method)(note 2) - unidirectional only i fsm 200 amps pb rohs compliance rohs compliance
version:f11 ratings and characteristic curves (1.5smc series) fig.2 pulse derating curve 0 25 50 75 100 125 0 25 50 75 100 125 150 175 200 t a , ambient temperature ( o c) peak pulse power(p pp ) or current (i pp ) a derating in percentage (%) fig. 4 maximum non-repetitive forward surge current unidirectional only 0 20 40 60 80 100 120 140 160 180 200 1 10 100 number of cycles at 60 hz ifsm, peak forward surge a current (a) 8.3ms single half sine wave jedec method fig. 3 clamping power pulse waveform 0 20 40 60 80 100 120 140 0 0.5 1 1.5 2 2.5 3 3.5 4 t, time ms peak pulse current (%) td peak value ippm tr=10usec half value-ippm/2 10/1000usec, waveform as defined by r.e.a. pulse width(td) is defined as the point where the peak current decays to 50% of ippm fig. 5 typical junction capacitance 10 100 1000 10000 1 10 100 v( br ), breakdown voltage (v) cj, junction capacitance (pf) a ta=25 f=1.0mhz vsig=50mvp-p vr=0 vr-rated stand-off voltage unidirectional bidrectiona fig. 1 peak pulse power rating curve 0.1 1 10 100 0.1 1 10 100 1000 10000 tp, pulse width, (us) p ppm , peak pulse power, kw non-repetitive pulse waveform shown in fig.3 ta = 25
test stand-off maximum maximum maximum maximum current voltage reverse leakage peak pulse clamping voltag e temperature it v wm @ v wm current ippm @ ippm coefficient min max (ma) (v) id (ua) (a) (note 2) vc(v) of vbr(%/ ) 1.5smc6.8 ddj 6.12 7.48 10 5.50 1000 145 10.8 0.057 1.5smc6.8a dej 6.46 7.14 10 5.80 1000 150 10.5 0.057 1.5smc7.5 dfj 6.75 8.25 10 6.05 500 134 11.7 0.061 1.5smc7.5a dgj 7.13 7.88 10 6.40 500 139 11.3 0.061 1.5smc8.2 dhj 7.38 9.02 10 6.63 200 126 12.5 0.065 1.5smc8.2a dkj 7.79 8.61 10 7.02 200 130 12.1 0.065 1.5smc9.1 dlj 8.19 10.00 1.0 7.37 50 114 13.8 0.068 1.5smc9.1a dmj 8.65 9.55 1.0 7.78 50 117 13.4 0.068 1.5smc10 dnj 9.00 11.00 1.0 8.10 10 105 15.0 0.073 1.5smc10a dpj 9.50 10.5 1.0 8.55 10 108 14.5 0.073 1.5smc11 dqj 9.90 12.1 1.0 8.92 5.0 97 16.2 0.075 1.5smc11a drj 10.5 11.6 1.0 9.40 5.0 100 15.6 0.075 1.5smc12 dsj 10.8 13.2 1.0 9.72 5.0 91 17.3 0.078 1.5smc12a dtj 11.4 12.6 1.0 10.2 5.0 94 16.7 0.078 1.5smc13 duj 11.7 14.3 1.0 10.5 5.0 82 19.0 0.081 1.5smc13a dvj 12.4 13.7 1.0 11.1 5.0 86 18.2 0.081 1.5smc15 dwj 13.5 16.5 1.0 12.1 5.0 71 22.0 0.084 1.5smc15a dxj 14.3 15.8 1.0 12.8 5.0 74 21.2 0.084 1.5smc16 dyj 14.4 17.6 1.0 12.9 5.0 67 23.5 0.086 1.5smc16a dzj 15.2 16.8 1.0 13.6 5.0 70 22.5 0.086 1.5smc18 edj 16.2 19.8 1.0 14.5 5.0 59 26.5 0.088 1.5smc18a eej 17.1 18.9 1.0 15.3 5.0 60 25.5 0.088 1.5smc20 efj 18.0 22.0 1.0 16.2 5.0 54 29.1 0.090 1.5smc20a egj 19.0 21.0 1.0 17.1 5.0 56 27.7 0.090 1.5smc22 ehj 19.8 24.2 1.0 17.8 5.0 49 31.9 0.092 1.5smc22a ekj 20.9 23.1 1.0 18.8 5.0 51 30.6 0.092 1.5smc24 elj 21.6 26.4 1.0 19.4 5.0 45 34.7 0.094 1.5smc24a emj 22.8 25.2 1.0 20.5 5.0 47 33.2 0.094 1.5smc27 enj 24.3 29.7 1.0 21.8 5.0 40 39.1 0.096 1.5smc27a epj 25.7 28.4 1.0 23.1 5.0 42 37.5 0.096 1.5smc30 eqj 27.0 33.0 1.0 24.3 5.0 36 43.5 0.097 1.5smc30a erj 28.5 31.5 1.0 25.6 5.0 38 41.4 0.097 1.5smc33 esj 29.7 36.3 1.0 26.8 5.0 33 47.7 0.098 1.5smc33a etj 31.4 34.7 1.0 28.2 5.0 34 45.7 0.098 1.5smc36 euj 32.4 39.6 1.0 29.1 5.0 30 52.0 0.099 1.5smc36a evj 34.2 37.8 1.0 30.8 5.0 31 49.9 0.099 1.5smc39 ewj 35.1 42.9 1.0 31.6 5.0 27 56.4 0.100 1.5smc39a exj 37.1 41.0 1.0 33.3 5.0 29 53.9 0.100 1.5smc43 eyj 38.7 47.3 1.0 34.8 5.0 25 61.9 0.101 1.5smc43a ezj 40.9 45.2 1.0 36.8 5.0 26 59.3 0.101 1.5smc47 fdj 42.3 51.7 1.0 38.1 5.0 23 67.8 0.101 1.5smc47a fej 44.7 49.4 1.0 40.2 5.0 24 64.8 0.101 1.5smc51 ffj 45.9 56.1 1.0 41.3 5.0 21 73.5 0.102 1.5smc51a fgj 48.5 53.6 1.0 43.6 5.0 22 70.1 0.102 1.5smc56 fhj 50.4 61.6 1.0 45.4 5.0 19 80.5 0.103 1.5smc56a fkj 53.2 58.8 1.0 47.8 5.0 20 77.0 0.103 1.5smc62 flj 55.8 68.2 1.0 50.2 5.0 17 89.0 0.104 1.5smc62a fmj 58.9 65.1 1.0 53.0 5.0 18 85.0 0.104 1.5smc68 fnj 61.2 74.8 1.0 55.1 5.0 16 98.0 0.104 1.5smc68a fpj 64.6 71.4 1.0 58.1 5.0 17 92.0 0.104 1.5smc75 fqj 67.5 82.5 1.0 60.7 5.0 14 108 0.105 1.5smc75a frj 71.3 78.8 1.0 64.1 5.0 15 103 0.105 1.5smc82 fsj 73.8 90.2 1.0 66.4 5.0 13 118 0.105 1.5smc82a ftj 77.9 86.1 1.0 70.1 5.0 13.9 113 0.105 1.5smc91 fuj 81.9 100 1.0 73.7 5.0 12 131 0.106 1.5smc91a fvj 86.5 95.5 1.0 77.8 5.0 12.6 125 0.106 version:f11 electrical characteristics (ta=25 unless otherwise noted) device marking code breakdown voltage vbr (v) (note 1) general part number
test stand-off maximum maximum maximum maximum current voltage reverse leakage peak pulse clamping voltag e temperature it v wm @ v wm current ippm @ ippm coefficient min max (ma) (v) id (ua) (a) (note 2) vc(v) of vbr(%/ ) 1.5smc100 fwj 90 110 1.0 81.0 5.0 10.9 144 0.106 1.5smc100a fxj 95 105 1.0 85.5 5.0 11.4 137 0.106 1.5smc110 fyj 99 121 1.0 89.2 5.0 9.9 158 0.107 1.5smc110a fzj 105 116 1.0 94.0 5.0 10.3 152 0.107 1.5smc120 gdj 108 132 1.0 97.2 5.0 9.1 173 0.107 1.5smc120a gej 114 126 1.0 102.0 5.0 9.5 165 0.107 1.5smc130 gfj 117 143 1.0 105.0 5.0 8.4 187 0.107 1.5smc130a ggj 124 137 1.0 111.0 5.0 8.7 179 0.107 1.5smc150 ghj 135 165 1.0 121.0 5.0 7.3 215 0.108 1.5smc150a gkj 143 158 1.0 128.0 5.0 7.6 207 0.108 1.5smc160 glj 144 176 1.0 130.0 5.0 6.8 230 0.108 1.5smc160a gmj 152 168 1.0 136.0 5.0 7.1 219 0.108 1.5smc170 gnj 153 187 1.0 138.0 5.0 6.4 244 0.108 1.5smc170a gpj 162 179 1.0 145.0 5.0 6.7 234 0.108 1.5smc180 gqj 162 198 1.0 146.0 5.0 6.1 258 0.108 1.5smc180a grj 171 189 1.0 154.0 5.0 6.4 246 0.108 1.5smc200 gsj 180 220 1.0 162.0 5.0 5.4 287 0.108 1.5smc200a gtj 190 210 1.0 171.0 5.0 5.7 274 0.108 notes: 1. vbr measure after it applied for 300us, it=square wave pulse or equivalent. 2. surge current waveform per figure. 3 and derate per figure. 2. 3. for bipolar types having vwm of 10 volts and under, the id limit is doubled. 4. for bidirectional use c or ca suffix for types 1.5smc6.8 through 1.5smc200a 5. all terms and symbols are consistent with ansi/ieee c62.35. version:f11 electrical characteristics (ta=25 unless otherwise noted) general part number device marking code breakdown voltage vbr (v) (note 1)
|
